Pool Alarm (Doors & Windows & Gates)

Needed per Window or Door that opens onto Pool behind “enclosure” Fence / Screen Enclosure / etc. Installation & Batteries not included. Double stick tape included for ease of install!

To install:

1. Measure up from your floor inside the home next to each door and window (or if your gate doesn’t have self closing latch at 54″) and place a pencil mark
2. Use the double stick tape to mount the alarm to the door or window above the pencil mark.
3. Mount the sensor and sensor receiver to both sides of the door and window above the alarm (stock photo shows below but that is only allowed if sensors are both screwed / permanent fixed). If necessary, purchase additional double sided foam tape to thicken the sensor receiver on the part of the door or window that moves if necessary so both sensors touch.
4. Add batteries and test! You must push the pass button before opening door or alarm will sound.